| |
|
7" Range Hood Damper, For 7" Range Hoods.
|
«
Hood Vent Damper
»
We are very pleased with our purchase of a 7" round damper for the vent pipe of our kitchen vent hood. The price was VERY reasonable. The seller's shipping charges were modest. The packaging was professional and protected our purchase enroute. I will check to see other items carried by this seller for future purchases. We certainly want to deal with this seller again and recommend him to all others.
Rating: 
(5
out of 5) @ 2008-12-18
|
«
Thank You so much!
»
This seller is top notch. Quick Shipping, and product is exactly as described. This seller should be commended for selling an important range hood part that major hardware chains and parts stores refuse to carry. Highly Recommended seller!
Rating:
(5
out of 5) @ 2008-12-16
|
«
7" Duct damper via Amazon
»
Needed a 7" dia duct damper to keep out drafts this winter. It's hard to find
one in the 7" dia size. I ordered one last summer and it broke. The two thin
aluminum damper halves came unhinged and fell down into the fan.
I ordered some more in November. I figured that I could alter the damper to
make it last more than 45 minutes. It took OVER THREE weeks for them to arrive.
To strengthen the hinge pivot of the two damper halves, I used two small patches
of tape to keep them from coming unhinged. I would not recommend this item from
Broan because it is extremely fragile. If you have access to another vendor for
this item I suggest you try them instead.
Rating: 
(1
out of 5) @ 2008-12-14
|
«
Cheaply made
»
This is a very cheaply made damper for older range venting systems that still have a 7" round vent pipe. Unlike the included rectangular damper, this one (not included in my Broan range hood) has no insulation between metal parts and thus is very noisy as the vented air passes through. Now we're forced to go through the extra time and expense of adapting the round pipe to the rectangular damper.
Rating:
(1
out of 5) @ 2008-08-27
|
«
Good quality damper.
»
This duct damper adds an inexpensive but effective backflow preventative device for the Broan Allure series 7" dia exhaust configuration. It can be installed on any brand duct discharge that is nominally 7" diameter.
The damper must be mounted vertically as it uses gravity to close when your exhaust fan is OFF.
Make sure you use aluminum foil tape or duct tape actually rated for use on ductwork. Most standard duct tape is not suitable for a permanent installation.
Rating:
(5
out of 5) @ 2008-06-09
|