| |
|
With this all purpose blade for table saws you can rip and crosscut 1" 2" rockhards and softwoods resulting in a smooth as sanded surface. With 20° face hook, ply veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut), second-step finishing and cutting 1/16" oversize to allow for resurfacing. Buy and sharpen one blade instead of 3 (24T rip, 50T combination and 80T crosscut).
|
«
Awesome Table Saw Blade
»
This is a very good, high quality blade that will give you an awesome cut. It is a little pricey, but it is worth every penny.
Rating: 
(5
out of 5) @ 2008-12-24
|
«
Best Ever
»
Forrest does not exagerate when they describe the capabilities of this blade. When I bought the blade I was beginning a cabinet project for friends who wanted it for a gift to their son. The cabinet was a challenge to begin with and for it to be a gift really put the pressure on. I cut my Red Oak stock to width plus a small allowance for a pass over the jointer. For some reason I did not check the quality of the cut edge after the first board as I usually do. I really did not need that Jointer allowance as the cut edge was every bit as good as the Jointed edge. This blade is fantastic and proved to me that it pays to buy quality.
Rating:
(5
out of 5) @ 2008-11-25
|
«
Exceeded my expectations
»
I have about 15 table saw blades from Freud, Dewalt, Oldham, Rigid, you name it. All of them under 100 dollars. I just didn't think that a 100 dollar saw blade could make such a big difference. I mean how can one company make a saw blade that is THAT much better, I thought. It does!! They can! I was surprised how big a difference this saw blade makes. It is truly a wonder, even on my old craftsman 500 dollar table saw with the out of alignment motor. WOW!!! That's all I can say. Smooth effortless cuts. WOW!
P.S. One thing I noticed is that the blade is much heavier than any of the other blades.
Rating:
(5
out of 5) @ 2008-11-11
|
«
wow
»
over 30 years of woodworking (for a living). the price has kept me away, now i want a back up, a 12" mitre, a 8 1/2 mitre.....worth the bucks.
Rating:
(5
out of 5) @ 2008-10-06
|
«
Best Blade around
»
Second Woodworker II I've purchased. First one is going strong, just wanted to know I'd have a backup when my first needs sharpening sometime in the distant future. With the 40 Tooth version, I rarely change blades no matter if I'm ripping or cross cutting. First time you see the edge of whatever board you cut, whether it is a rip or cross cut, you will be SO happy with your purchase. Rips are so clean that I don't need to take a pass on the jointer. These blades are awesome at both ripping and cross cutting and this is while cutting primarily hard woods, but works equally well in soft woods. I've tried many other brands over the 20+ years of woodworking and I wish I'd found the Forrest Woodworker II when I was just starting out. This is THE blade!
Rating:
(5
out of 5) @ 2008-10-05
|